Futaba 3PV 2.4GHz 3Ch FHSS/S-FHSS Radio System R203GF 3ch Telemetry Receiver For Boat Car RC Model

Futaba T3PV 3+1 Channel FHSS, S-FHSS & T-FHSS* Radio

Hold the 3PV in your hand, and instantly feel how lightweight it is.

Access the programming menu on the easy-to-read screen, and see how sophisticated it is.

Experience the 3PV’s super-fast response rate, and realize that you’re in command of the system that can make a real difference on race day.

You also get FHSS, S-FHSS and T-FHSS protocols, making it one of R/C’s most versatile surface system. The 3PV is available with a high-voltage R203GF receiver that’s an ideal match for brushless ESCs and digital servos.


T3PV Features:

  • System: FHSS, S-FHSS & T-FHSS 2.4GHZ (T-FHSS / Telemetry only available with the optional R304SB(-E) receiver)
  • 3+1 Channels (the 4:th channel can only be used when 4WS mixing (crawlers) or Brake mixing and with a 4-channel receiver)
  • Channel 3 can be used on SW1 (two endpoints) or at DT3 where the D/R normally is at (stepped function)
  • 10 Model Memory
  • 4-Character Model Name
  • Sub-Trim (CH1-4)
  • Channel-4 Trim (only visible if 4WS or Brake Mixing is activated)
  • Steering Dual Rates (D/R)
  • Steering End Point Adjustement (EPA-CH1)
  • Throttle End Point Adjustement (EPA-CH2)
  • Channel-3 End Point Adjustement (EPA-CH3)
  • Channel-4 End Point Adjustement (EPA-CH4) – this is only displayed when 4WS or Brake Mixing is activated
  • 4-Wheel-Steering / Brake Mixing (SMX) (booth mixers can’t be used at the same time)
  • Sero Reverse (CH1-4)
  • Steering Exponential (EXP-CH1)
  • Throttle Exponential (EXP-CH2)
  • Throttle Fail-Safe (F/S)
  • ABS Brakes (3- cycle speeds available)
  • Model Data Copy
  • Auto Power-Off after 10 minutes

Low Battery Alarm:

  • 4x AA alkaline batteries – set LBA @ 4.2V
  • 5 cell (6V) NiMH – set LBA @ 5.0V
  • 2S (6.6V) LiFe – set LBA @ 5.8V

Available T-FHSS Telemetry Functions when using the R304SB(-E) receiver (not included):
Receiver battery voltage (no sensor needed)
External voltage (if this sensor is used the receiver battery voltage is not visible on the TX LCD) – SBS-01V
No other telemetry sensors can be used

Suitable Receivers:

  • R203GF S-FHSS
  • R304SB(-E) T-FHSS (optional) – Use only Futaba Digital & BLS servos

Optional TX Batteries:

  • 4x AA alkaline batteries (battery holder included)
  • YT1800A (5 Cell NiMH)
  • HT5F1800B / FPEBA0142 (5 Cell NiMH)
  • FT2F1700B / FPEBA0140 (2S 6.6V LiFe)
  • FT2F2100B / FPEBA0135 (2S 6.6V LiFe)

T3PV-2.4G Transmitter:

  • FHSS/S-FHSS/T-FHSS* system
  • Wheel type
  • 3+1 channels (the 4th channel is used for mixing functions only)
  • Transmitting frequency: 2.4GHz band
  • Power requirement: Size AA Dry cell battery x 4 (6V) (or 5-cell NiMH / 2-cell LiFe)
  • Current drain: 100mA or less
  • Transmission antenna: 1/2λ di-pole (Built-in)

Receiver R203GF:

  • 3 channels
  • S-FHSS/FHSS auto detection system
  • Power requirement: 4.8V ~7.4V battery (Dry cell battery cannot be used)
  • Size: 39 x 26 x 10 mm (excluding a projection part)
  • Weight: 8 g